Table of Contents
Advertisement
3. To detect the installed adapter in the system or logical partition that is running the AIX operating
system, run the following command:
cfgmgr
Note: The following message is displayed if you are installing the IBM Flash Adapter 90 (PCIe2
0.9TB) for the first time in the system or logical partition.
The following screen is displayed indicating that the adapter is installed and detected in the VM.
0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.pciex.flash:devices.pciex.pciex1014.4aa.1014.70.3:
devices.pciex.1410aa0414107000:devices.pciex.14107000:
devices.pciex.pciex1014.4aa.3:devices.pciex.1410aa04:
devices.pciex.pciexclass.050100:
devices.pciex.pciexclass.000501
4. If the IBM Flash Adapter 90 (PCIe2 0.9TB) is already listed as available, no further installation steps
are required.
5. Verify if whether the Flash adapter is available by running the following command:
-bash-4.2# lsdev -Cc disk
The following screen is displayed:
hdisk0 Available 00-00-00 Other SAS Disk Drive
hdisk1 Available 07-00-01 IBM Flash Adapter Disk
Next, you can install the device driver. For instructions to install the device driver in system or logical
partition that is running the AIX operating system, see "Installing the device driver in an AIX system or
logical partition" on page 196.
Verifying the IBM Flash Adapter 90 (PCIe2 0.9TB) installation in a Linux VM:
Learn how to verify the Flash storage adapter installation in a Linux virtual machine (VM).
1. Use the HMC to verify the adapter installation. For instructions, see Verifying the installed part.
2. Verify if whether the physical adapter is partitioned to the logical partition that you wanted the
adapter to be available in.
Note: Ensure that the adapter is detected in the partition.
3. To detect the installed adapter in the system or VM that is running the Linux operating system, run
the following command:
lspci | grep IBM
The following screen is displayed indicating that the adapter is installed and detected in the VM.
01:00.0 FLASH memory: IBM Device 04aa (rev 03)
195
Managing PCI adapters
Advertisement
Table of Contents
