Table of Contents
Advertisement
Notes
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• If many short programmes are recorded on a tape, multiple programmes may be
included in a single block. In this case, only the latest programme information will
appear in the ACCES SMART screen.
• Blank time is measured from the end of the last recorded programme to the end of
the tape. However, if you eject the tape and then make a new recording on the
same tape, the original recorded programme(s) is displayed as a blank space.
• If no information is stored in the VCR's memory, DONNEES RECENTES does
not appear in the ACCES SMART screen.
• The station name may not appear if the VCR does not receive station name
information signals.
• If you start recording a programme "D" from the middle of a previously recorded
programme "A" and into another previously recorded programme "B," the Acces
Smart information for the second programme "B," which is recorded over, is
deleted.
Originally recorded programmes
A
Recording the programme "D" over the programme "A" and "B"
A
D
B
C
C
Searching using the Acces Smart function
65
Advertisement
Table of Contents
