Sony ShowView SLV-SE510B Operating Instructions Manual page 35

5 Press m to highlight HEURE DU
PROGRAMME, then press OK.
LECTURE
OK
6
Press M/m repeatedly until the
programme position of the station
LECTURE
that carries a time signal appears.
OK
If the VCR does not receive a time
signal from any station, REGLAGE
AUTO returns to NON
automatically.
7
Press MENU to exit the menu.
MENU
Tips
• If you set REGLAGE AUTO to OUI, the Auto Clock Set function is activated
whenever the VCR is turned off. The time is adjusted automatically by making
reference to the time signal from the station whose programme position is
displayed in the "HEURE DU PROGRAMME" row.
If you do not need the Auto Clock Set, select NON.
• If you want to return to the previous menu, highlight RETOUR and press OK.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
HORLOGE
REGLAGE AUTO
HEURE DU PROGRAMME 1
REGLAGE MANUEL
2 8 . 9 . 2 0 0 1 VEN 1 8 : 0 0
SELECTIONNER :
CONFIRMER : OK
SORTIE
HORLOGE
REGLAGE AUTO
HEURE DU PROGRAMME 2
REGLAGE MANUEL
2 8 . 9 . 2 0 0 1 VEN 1 8 : 0 0
SELECTIONNER :
CONFIRMER : OK
SORTIE
Setting the clock
AAB
: MENU
CDE
: MENU
35