Advertisement
If the AC power source outlet has a power switch, set it to the ON (|) position.
5.
Verify that the AC and the DC LEDs are lit green and on steadily.
6.
Part 3: Perform the Initial Configuration
By default, Zero touch provisioning (ZTP) starts automatically. Zero touch provisioning (ZTP) allows you to provision new Juniper
Networks devices in your network automatically, with minimal manual intervention. You can use either management ports or
network ports on your switch to connect to the network. When you physically connect a device to the network and boot it with
a default factory configuration, the device upgrades (or downgrades) the Junos OS release and autoinstalls a configuration file
from the network. For more information on ZTP, see
If you do not use ZTP, you must disable the ZTP process and then perform the following:
NOTE:
To disable the ZTP process, manually delete the
hierarchy.
You must perform the initial configuration of the router through the console port. Before you begin, set the following parameter
values in the console server or PC:
Baud Rate—9600
Flow Control—None
Data—8
Parity—None
Stop Bits—1
DCD State—Disregard
To connect and configure the router from the console:
Connect the console port to a laptop or PC using the provided RJ-45 cable and RJ-45 to DB-9 serial port adapter. The console
1.
(
) port is located on the port panel of the router.
CON
Log in as root. There is no password. If the software booted before you connected to the console port, you might need to press
2.
the Enter key for the prompt to appear.
login: root
Start the command-line interface (CLI).
3.
root@% cli
Enter configuration mode.
4.
root>configure
Add a password to the root administration user account. Enter a cleartext password
5.
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
Copyright © 2018, Juniper Networks, Inc.
Zero Touch Provisioning
.
auto-image-upgrade
PTX10001-20C Quick Start
statement located in the
[edit chassis]
3
Advertisement
