Protecting Your Settings And "Learned" Signals - Preset Lock Function - Sony RM-AV2000 Operating Instructions (primary manual) Operating Instructions Manual

Protecting your
settings and "learned"
signals
— Preset Lock function
You can lock the Commander so that you
can not change, add, or clear any of your
component code settings (page 8),
"learned" signals (pages 13, 25, 29, etc.),
System Control settings, (page 20),
volume setting (page 18), or System
Power-off setting (page 26).
TV VCR
AMP
SYSTEM CONTROL
1 2 3
TV VCR1 VCR2
AMP CD MD/DAT
1
While pressing COMMANDER
OFF, press MUTING.
COMMANDER
+
OFF
All the component names flash and
"OFF" key appears.
TV VCR
AMP
DVD DBS TUNER
123
MD DECK CBL CD OP
AB
OFF
3
COMMANDER
LIGHT
OFF
VCR3 DVD DBS/CBL
DECK B/A TUNER OPTION
CHANNEL VOLUME
+ +
±
– –
≠
MUTING
MUTING
DVD DBS TUNER
123
MD DECK CBL CD OP
AB
2
Press the OFF key.
OFF
All the component names stop
falshing and stay lit, and "ON"
flashes.
3
Press COMMANDER OFF.
2
When the preset lock is on
If you try to set a component code
number (page 8) or perform learning
(page 13), you will hear beeps and "NG"
flashes on the display.
To unlock the preset lock
To unlock the preset lock, follow the
same procedure as the above and press
"ON" in Step 2. "OFF" appears on the
display.
1
OFF
TV VCR DVD DBS TUNER
123
AMP MD DECK CBL CD OP
AB
ON
31