To Mount Optional Circuit - Casio CE-6800 Service Manual

4-10. To mount optional circuit

The following optional circuits are provided for this model CE6800.
1. Multi-drawer circuit
2. Paper near end circuit
1) Multi-drawer kit (Only Drawer 2)
1-1. Prepare the following parts kit for multi-drawer circuit. The parts kits are supplied from sales division.
MDL-10 ------------- Multi-drawer kit
1-2. Check whether the parts of multi-drawer kit are as follows:
Code No. Parts Name
10006121 Drawer connector cable
62481534 Extension cable for Drawer E440714*1
59000209 Screw
1-3. Connect the drawer connector cable to the main PCB by solder.
1-4. Open the back cover of lower cabe to release the 2 screws. Then, connect the necessary extension
cable for drawer. In this case, do no forget to fix the FG wire of the extension cable to the frame ground
by the screw.
Release the 2 screws and open the
back cover of lower case.
1-5. Connect 1 pin FG connector of the drawer extension cable to the drawer 1 pin connector.
Close the back cover of lower case by 2 screws.
Specification Q'ty
E440721A*1 1
1
3X4ZMC-3. 1
Drawer2 Drawer3 Drawer4
Connect the extension
drawer cable to the
drawer connector.
— 16 —
Red
Brown
Black
Fix the FG wire of the
extension drawer cable by
screw of the parts kit.