Using The Channel Menu - Sony KV-27FA210 Instructions: TV stand (primary manual) Operating Instructions Manual

Using the Channel
To access the Channel menu, use the following steps:
To Display To Highlight
Press f to highlight an option; then press
Favorite 1
Channels
Quick access
2
to favorite
channels
3
4
✍
To use Favorite Channels, exit all menus and press
desired channel number and press
Use the
Cable
select it.
On:
Off:
✍
After changing your cable settings, you will need to perform Auto Program. See "To perform Auto
Program again" on page 21.
Use the
Channel Fix
to select it.
Off:
2-6:
Video 1:
✍
You cannot use Favorite Channels, Cable, Channel Skip/Add, or Channel Label when Channel Fix is set.
Menu
To Select
.
Use the F or f buttons to highlight the position (1-8) where you want to set a
favorite channel, then press
Use the F or f buttons to find the channel you want to add to your favorite
channels.
Press to select the channel. The TV will automatically change to the
selected channel.
Press to return to the Channel menu or press
G
.
F or f buttons to highlight one of the following options, then press
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
F or f buttons to highlight one of the following options, then press
Channel Fix is not set.
Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box's or VCR's remote control for channel selection.
Select from available video inputs when you have connected video
equipment (e.g., a satellite receiver) and you want your TV fixed to it.
Video Audio Channel
Favorite Channels
Cable : On
Channel Fix: Off
Auto Program
Channel Skip/Add
Channel Label
Program favorite
channels
Move:
.
to exit.
F f
. Press or to move the cursor to the
Using the Menus
Parent Timer Setup Basic
Program
Select: End:
to
(continued)
29