Sony SGPT11 Series Help Manual page 39

5. Place the tablet device in the upper slot of the cradle.
6. Make sure the charge indicator is lit.
Note
When you hold or unplug the AC adapter, do not touch its terminal area.
Pulling the cable of the AC adapter forcedly when unplugging it from the cradle may break the AC adapter or
cradle. So, be sure to hold the foot of the cradle.
When using the cradle foot at its lower position, run the AC adapter cord through the cutout of the cradle foot
to prevent the cradle from falling over.
When placing your tablet device in the cradle while the strap attached, make sure the strap does not get
caught between the tablet device and the cradle.
Hint
When you set your tablet device in the cradle for the first time, you will be prompted to select which
application you want to start when using the cradle. If you check [Use by default for this action] and select an
application, the selected application will start the next time you set your tablet device in the cradle.
To return to the default setting, tap [
(the application that is selected to start automatically). On the displayed application management screen, tap
[Clear defaults]. The setting will be cleared.
Removing your tablet device from a cradle
Lift your tablet device up in a straight line.
Apps] - [ Settings] - [ Applications] - [Manage applications] -