Using Media Go - Sony SGPT11 Series Help Manual

Using Media Go

Media Go is computer software that supports content management and transfer between your tablet device and
computer.
By installing Media Go in your computer, you can transfer music, photos, and videos to your tablet device.
Note
For details on how to use Media Go, refer to the help in the main menu of Media Go.
Installing Media Go on your computer
1. Access http://www.sony.com/mediago/Tablet
2. Double-click the downloaded file.
3. Install Media Go by following the instructions on the screen.
If you are prompted to install additional software component during installation, download and install it as
instructed.
Transferring content to your tablet device using Media Go
1. Connect your computer to your tablet device with a commercially available microUSB cable [Details].
2. Start Media Go by selecting it from the start menu of your computer.
You can now transfer content between your tablet device and computer.
Note
If [Sony Tablet] is not displayed on the left of the Media Go screen, this means that your tablet device is not
recognized by the computer. Check whether or not the device driver is installed correctly.
For details on using Media Go on the computer, refer to
from your computer and download Media Go.
http://www.sony.com/mediago/Tablet