Appendix C Repacking The Switch - Cisco Catalyst 6840 Series Hardware Installation Manual

Repacking the Switch
If you need to return or move the switch chassis, follow these steps to repack the switch using the original
packaging material.
Procedure
Step 1
Set the chassis in the bottom pallet.
Figure 39: Packing Material
Step 2 Place the packing bag over the chassis.
Step 3
Place the front-packing material and power supply packing material around the chassis.
Step 4 Place the power supplies in the spaces provided in the power supply packing material.
Step 5
Place the top-packing material over the top of the chassis and power supplies.
Step 6 Place the rack-mount kit and the accessory kit on the top-packing material.
You must include the accessory kit for the final packaging to fit properly.
Note
Step 7
Place the outside carton over the entire package.
Step 8 Fold the outside carton down over the top and seal with packing tape.
A P P E N D I X
Catalyst 6840-X Switch Series Hardware Installation Guide
C
77