System Connections; Remote Control - Sharp XL-DH259N Operation Manual

System connections

Make sure to unplug the AC power cord before making any connections.
Right speaker
AM loop
antenna
Installing the AM loop
antenna
< Assembling >
< Attaching to the
wall >
wall
screws
(not supplied)
Precautions
● Please ensure that the equipment is positioned in a well
ventilated area and ensure that there is at least 4" (10 cm)
of free space along the sides, top and back of the
equipment.
4" (10 cm) 4" (10 cm)
M I C R O C O M P O N E N T S Y S T E M
XL-DH259

Remote control

Battery installation
Use 2 "AAA" size batteries (UM/SUM-4, R3, HP-16 or
similar). Batteries are not included.
1 Open the battery cover.
2 Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them
toward the (–) battery terminals.
3 Close the cover.
4" (10 cm)
4" (10 cm)
Speaker connection
● Connect the black wire to the minus (–)
terminal, and the red wire to the plus
(+) terminal.
● Use speakers with an impedance of 4
ohms or more, as lower impedance
speakers can damage the unit.
● Do not make a mistake when
connecting the right and left speakers.
The right speaker is the one on the
right side when you face the unit.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
● Do not stand or sit on the speakers. You may be injured.
Caution:
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
● Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
● Installing the batteries incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Notes concerning use:
● Replace the batteries if the operating distance is reduced
or if the operation becomes erratic. Purchase 2 "AAA" size
batteries (UM/SUM-4, R3, HP-16 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat, shock,
and vibrations.
E-2
Video cable
TV
(not supplied)
To video input jack
Left
speaker
Red
Black
FM
antenna
AC outlet
(AC 120 V ~ 60 Hz)
Incorrect