Table of Contents
Advertisement
Operating Your Camera
5. Select the position at which the CAM TITLE will be located on the screen.
Move the cursor to 'POS' and press SET button.
The CAM TITLE is displayed on the top-left of the monitor screen.
(Default position)
FRONT DOOR
Select the position by using the 4-directional buttons, then press the SET
button to confirm the position.
FRONT DOOR
to Locate, then SET
6. When completed, move the cursor to 'END' and press SET button.
COLOR CCD CAMERA
to Locate, then SET
to Locate, then SET
22
User's Manual
White Balance Control
Your camera provides 3 'WHITE BAL.' control modes. You can select the most
suitable one. You can adjust the white balance.
1. Press the SET button to display the main setup menu and move the arrow
indicator to 'WHITE BAL.' using the UP or DOWN button.
2. Set 'WHITE BAL.' to the desired mode using LEFT or RIGHT button.
The three white balance control modes are as follows :
ATW (Auto Tracking White Balance): When color temperature is 1800 ~ 10500˚K,
select this mode.
AWC (Auto White balance Control): The white balance is automatically
adjusted in a specific environment. In order to obtain the best result, press
the SET button while the camera focuses on white paper. If the environment
including the light source is changed, you have to adjust the white balance
again.
Manual: To fine adjust, select the Manual mode. You can increase or decrease
the red or blue factor while monitoring the difference on the screen. Set
to 'MANUAL' mode and press the SET button. Increase or decrease the
value for red(R-Gain) and blue(B-Gain), watching the color of the picture,
and press the SET button when you obtain the best color.
COLOR CCD CAMERA
23
User's Manual
Advertisement
Table of Contents
