Sony STR-DE975 Operating Instructions Manual page 65

RM-PP505L only
Remote Button Operations
TAPE Receiver
MD/DAT Receiver
MACRO 1 Receiver
MACRO 2
Notes
• Some functions explained in this section may not work
depending on the model of the receiver.
• The above explanation is intended to serve as an example only.
Therefore, depending on the component the above operation
may not be possible or may operate differently than described.
• The /10, /11, /12, 3RD, NIGHT MODE and AUDIO SPLIT
functions are not available for set operation.
RM-PP505 and RM-PP505L
Selecting the mode of the remote
Set the remote mode using the USE MODE button and the
remote mode buttons.
RM-PP505
SLEEP
VIDEO 1 VIDEO 2 VIDEO 3
AUX MD/TAPE CD/SACD TUNER
AV1 AV2
MONITOR
1
TV/VIDEO
4
SEARCH
MODE
7
WIDE
CLEAR
SHIFT
>10
– /– –
D.TUNING
/11
– SUB CH + POSITION
m M
– VOL +
n N
SOUND FIELD
A.F.D.
MODE
AV TEST NIGHT
DISPLAY TONE MODE
TITLE
GUIDE MENU
ENTER/
EXEC
Function
To listen to audio tape.
To listen to Minidisc or
DAT.
To perform several
commands in sequence
automatically.
AV
? / 1
? / 1
USE MODE
SYSTEM
STANDBY
DVD/LD TV/SAT
PHONO
3RD
2ND ROOM
2 3
(SOURCE)
INPUT MODE
5 6
AUDIO
SPLIT
8 9
ANT
ENTER TV/VTR
0
DISC
/10 /12
JUMP
SWAP
. >
D. SKIP/
MUTING
P IN P CH/PRESET
X x
2CH PRESET
MULTI/2CH
EQ/TONE
A. DIRECT
AV ON
MUTING
SCREEN
MASTER
VOL
MAIN
MENU
EXIT/
RETURN
Selecting the command mode
You can switch the command mode (AV1 or AV2) of the
remote. If the command mode of the receiver and the
remote is different, you cannot use the remote to operate
the receiver.
Press 1 (AV1) (or 2 (AV2)) while pressing down USE
MODE.
The indicator lights once (twice for AV2), then the
command mode switches.
Setting to the 2nd room mode. (STR-DE975 only)
You can use the remote to select the function for the 2nd
room (2nd room mode). You can use the function buttons
only for the 2nd room.
Press 2ND ROOM while pressing down USE MODE.
(STR-DE975 only)
The indicator lights for a while, then the mode switches to
the 2nd room mode.
Tips (STR-DE975 only)
• If you press a function button while pressing down 2ND
ROOM, you can select the function for the 2nd room even
though the mode is not set to the 2nd room mode.
• If you press 2ND ROOM only, you can output the source signal
of the current function of the receiver to the amplifier in the
2nd room.
To check the mode of the remote
Press USE MODE. You can check the remote by the
indicator.
Mode Indicator lights
AV1 once
AV2 twice
2nd room once (for a while)
(STR-DE975 only)
To reset the remote to factory settings
Press ?/1, AV ?/1, and MASTER VOL – at the same
time.
The indicator lights 3 times, then goes off.
65