Assembly; Installing The Wall Mount - Bissell ICONpet 22883 Manual

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Connect the Extension
Wand to Motorized Floor
Cleaning Foot. You'll hear
a "click" when they're
connected.
Installing the Wall Storage & Charging Station
Go to support.BISSELL.com for more tips and video instructions on installing the Wall Storage
& Charging Station.
1.
Open the Wall Storage
& Charging Station, use the
bubble level to ensure it is
level and insert two screws
to secure to wall. In order to
charge the machine, ensure
the Wall Storage & Charging
Station is mounted near a wall
outlet.
2.
Connect the Hand Vacuum
Assembly to the Extension
Wand. You'll hear a "click"
when they're connected.
2.
Insert the tool holders into
the side of the Wall Storage
& Charging Station. To install
the charging cord, remove the
power cord clip from the Wall
Storage & Charging Station.
Insert the charging cord and
secure it with the charging
cord clip.
3.
Make sure to charge your
stick vacuum before first use.
Refer to page 6, "Charging the
Battery" for instructions.
3.
Plug the power adapter
into the wall and place the
machine on the Wall Storage &
Charging Station for charging.
Refer to page 6, "Charging the
Battery" for instructions.
BISSELL.com 5