Sony PHC-Z10 Primary Operating Instructions Manual page 5

4
CD
Tips
• You can change a CD
while playing another.
Press Z CD OPEN/
CLOSE to pull out the
CD tray and change the
CD. Press Z CD OPEN/
CLOSE again to close
the CD tray.
• Next time you want to
listen to a CD, just press
CD u. The player
turns on automatically
and starts playing the
CD.
Notes
• Do not pull out the CD
tray by hand, as that
may cause trouble or
malfunction.
• If the CD tray does not
turn when you press
DISC CHANGE, press
Z CD OPEN/CLOSE to
close the CD tray and
then press DISC
CHANGE again.
Press CD u .
The player plays all the tracks of
all the CDs in the CD tray once.
Use these buttons for additional operations
To
adjust the volume
stop playback
pause playback
go to the next track
go back to the previous Turn MULTI JOG
track
remove the CD
turn on/off the player Press POWER.
play only one CD
Display
CD number Track
number
POWER
Z CD OPEN/CLOSE
DISC CHANGE
VOLUME
MULTI JOG
x
CD u
Do this
Turn VOLUME (press VOL
+, – on the remote).
Press x on the CD section.
Press CD u (X on the remote).
Press the button again to resume
play after pause.
Turn MULTI JOG clockwise
(press > on the remote).
counterclockwise (press . on the
remote).
Press Z CD OPEN/CLOSE.
Press MODE until "ALL DISCS"
disappears, press DISC CHANGE to
select the desired CD and then press
CD u (DISC 1, DISC 2 or DISC 3
on the remote).
Basic Operations
Playing
time
5