Timer-Recording Radio Programs - Sony PHC-Z10 Primary Operating Instructions Manual

Timer-recording
radio programs
You can set timer to record the radio
at a certain time. You can also record
the sound of the component connected
to the LINE IN jacks of the player.
Make sure you have set the clock (see
"Setting the clock" on page 24).
Notes
• You cannot preset
recording timer and
waking up timer (page
25) at the same time.
• When recording from
the component
connected to the LINE
IN jacks of the player,
refer to the operating
instructions of the
component.
Tip
When you receive the
AM program in step 1,
press z/X to check if
the noise is heard. If so,
press MODE to select
the position that most
decreases the noise.
Before you begin, make sure the
not lit in the display. If it is lit, press STANDBY.
1
Tune in the radio station and insert a blank tape
into the tape compartment with the side you want
to record on facing you.
2
Press TIMER to display the
Do the following operations by checking the
display window.
3
Turn MULTI JOG to display "RADIO" and
"REC", and press ENTER MEM.
When recording from the component connected to
the LINE IN jacks of the player, turn MULTI JOG
to display "LINE" and "REC", and press ENTER
MEM.
STANDBY
TIMER
ENTER
MEM
(clock) indication is
indication.
continued
The Timer
27