Optional Components; Hooking Up Optional Components - Sony MHC-NXM1 Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A DIGITAL (OPTICAL) OUT jack
Use a digital optical cable (square, not supplied)
to connect an optional component (such as an
MD deck) to this jack. You can then record
digital audio from this system.
Note
There is no digital audio output from this jack during
playback of MP3 audio tracks.
Optional digital component
To the digital input jack of an
optional digital component
From the audio output jacks of an
optional analog component
Optional analog component
B VIDEO/MD IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck or VCR,
etc.) to these jacks. You can then listen to the
sound from the component.
GB
25