Playing Repeatedly; Repeat Play; Creating Your Own Program; Program Play - Sony MHC-NXM1 Operating Instructions Manual

Playing repeatedly

— Repeat Play

You can play all the tracks or a single track on a
disc repeatedly.
Press REPEAT repeatedly during playback
until "REP" or "REP1" appears.
REP: For all the tracks on a disc, or all the MP3
audio tracks in an album up to five times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both "REP" and
"REP1" disappear.
Notes
• You cannot select "REP" and "ALL DISCS SHUF"
at the same time.
• When you select "REP1", that track is repeated
endlessly until "REP1" is canceled.
Creating your own
program

— Program Play

You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 17).
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
3
Press DISC SKIP (or DISC 1 – 5 on the
unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with "AL" displayed.
4
Press . or > repeatedly until the
desired track number appears.
When programming the MP3 audio tracks,
press ALBUM – or + to select album, then
press . or > repeatedly until the
desired track number appears.
Selected track
number
DISC
1 2
Disc tray number
5
Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
6
Program additional discs or tracks.
To program Repeat steps
Other discs 3 and 5
Other tracks on the 4 and 5
same disc
Other tracks on 3 to 5
other discs
7
Press N (or nN on the unit).
Program Play starts.
Total playing time
(including selected track)
3 4 5
PGM A B
continued
GB
11