Msn Trunk Forwarding (Only In A Multi-Device Connection With Release 2.2 Or Later, Not For The U.s.) - Siemens HiCom 150 E Office Operating Instructions Manual

MSN Trunk Forwarding (Only in a Multi-Device
Connection with Release 2.2 or Later, Not for the
U.S.)
Deactivating call forwarding
Lift the handset.
(If call forwarding is already activated,
you hear a special dial tone.)
1
Enter the code # 1.
Activating
Lift the handset.
If call forwarding has already been activated,
a special dial tone sounds.
6 4
Enter the code
Enter the forwarding method (1=immediate,
2=on no answer, 3=on busy),
Enter your own MSN.
Enter the destination number without the ex-
ternal code.
Deactivating
Lift the handset.
When call forwarding is deactivated,
a special dial tone sounds.
6 4
Enter the code #64.
Enter the forwarding method (1=immediate,
2=on no answer, 3=on busy),
Enter your own MSN.
34
*
64.