Adjusting The Graphic Equalizer And; Storing The Personal File; Selecting The Surround Effect - Sony MHC-GX8000 Marketing Operating Instructions Manual

Adjusting the graphic
equalizer and storing a
personal file
You can adjust the sound by raising or
lowering the level of specific frequency band,
then store up to three personal files (P FILE) in
the memory.
Before operation, select the preset effect you
want for your basic sound.
1
Press b or B repeatedly to select a
frequency band or surround, then
press v or V to adjust the level or
select the surround effect.
Frequency band Frequency level
2
Press and hold P FILE until the
personal file number appears in the
display.
3
Press v or V or B or b to select the
personal file number (P FILE) where
you want to store the equalizer setting.
4
Press ENTER.
The setting is automatically stored as the
personal file you selected in step 3. The
previous setting stored at this memory
location is erased and replaced by the new
setting.
To call up the personal file
Press P FILE repeatedly until the personal file
number you want appears in the display.
Tip
If you do not want to store a personal file, press
ENTER after step 1.
Selecting the surround
effect
Press SURROUND.
Each time you press the button, the display
changes as follows:
SURROUND ON (
Y
SURROUND OFF
Note
When you choose other sound effects, the surround
effect may be cancelled.
MHC-RG77 4-238-409-11 (2)
)
SUR
GB
17