Cisco Catalyst 2960-X Series Hardware Manual page 16

1 FlexStack-Plus module slot and cover
2 Fan Exhaust
The rear panel of the Catalyst 2960-XR switches have a FlexStack-Plus module slot and
power supply module slots.
Figure 8. Catalyst 2960-XR Switch Rear Panel
1 FlexStack-Plus module slot and
cover
2 Power supply slot (with blank
module)
3 AC OK LED
FlexStack-Plus Ports and LEDs

RPS Connector

AC Power Connector

Power Supply Modules (Applies to the Catalyst 2960-XR Switches)

FlexStack-Plus Ports and LEDs
The stacking-capable switch models support stacking with the optional stack kit. It has the
FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear
panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports.
3 RPS Connector
4 AC power connector
4 PS OK LED
5 AC power connector on the power
supply module