Cisco Catalyst 2960-X Series Hardware Manual page 11

IRPS LED
The IRPS LED is only available on Catalyst 2960-XR switches.
Color
Off Second power supply is not present.
Green Both power supplies are present and operating.
Amber The second power supply is present, but the input is not
connected.
Blinking The second power supply is present, but the signal is faulty.
amber
Table 5 IRPS LED
Master LED
Port
Mode
Off Switch is not the stack master.
Green Switch is the stack master or a standalone switch.
Amber An error occurred when the stack was electing the stack master
switch, or another type of stack error occurred.
This table describes the master LEDs.
Table 6 Master LED
Port LEDs and Modes
The port and module slots each has a port LED. As a group or individually, the LEDs show
information about the switch and about the ports.
Mode Port Mode
LED
STAT Port status
SPEED Port speed
STACK Stack member
status
Stack port status
PoE PoE port power
Table 7 Port Mode LEDs
To select or change a mode, press the Mode button until the desired mode is highlighted.
When you change port modes, the meanings of the port LED colors also change.
RPS Status
Description
Description
The port status. This is the default mode.
The port operating speed: 10, 100, 1000 Mb/s,
or 10 Gb/s.
The stack member status.
The stack port status.
The PoE status.