Instrument Controls, Indicators, And Connectors; Rear-Panel Features; Right Front Panel - HP 7090A Operator's Manual

10. Air Filter.
11. DIP Switch Assembly:
English (ANSn paper formats, and to establish the HP·IS bus
address for computer or controller interfacing.
12.
HP-IB Bus Connector:
computer or controller.
13.
Fuse Holder and Fuse.
14.
Line Power Socket.

Instrument Controls, Indicators, and Connectors

The following list is intended to familiarize you with the location and
function of the HP 7090 controls, indicators, and connectors. For a detailed
explanation of any listing, refer to the appropriate section of this manual.
Some of the pushbuttons described below serve two functions - the
secondary functions, (called
panel) are aecessed by first pressing the blue SHIFT push button to display
"SHIFT' on the LCO. This manual uses the notation (SHIFT) before the
function title to denote shift functions.
The right front-panel controls and indicators are primarily
up the HP 7090 before performing a measurement. For example, values
may be assigned to various setup condition parameters (e.g., range, offset),
trigger modes and conditions may be specified, and input channels may be
selected for plotting.
Used to select between metric (ISO) and
Used to interface the HP 7090 with a host
shift functions and labeled in blue on the front
Scans by ArtekMedia © 2007
Rear-Panel
Features

Right Front Panel

used
for setting
Instrument Description and General Operation
2-5