Specifications - Sony MHC-GRX2 Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rated 25 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
North American model
Continuous RMS power output
European model
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
Other models
The following measured at AC 110, 220 V 60 Hz;
DIN power output (Rated)
Continuous RMS power output (Reference)
The following measured at AC 120, 240 V 60 Hz;
DIN power output (Rated)
Continuous RMS power output (Reference)
Peak music power output (Reference)
Outputs
PHONES (stereo phone jack):
SPEAKER:
30
35 watts + 35 watts
(6 ohms at 1 kHz,
10% THD)
30 watts + 30 watts
(6 ohms at 1 kHz, DIN)
35 watts + 35 watts
(6 ohms at 1 kHz,
10% THD)
60 watts + 60 watts
(6 ohms at 1 kHz,
10% THD)
25 watts + 25 watts
(6 ohms at 1 kHz, DIN)
30 watts + 30 watts
(6 ohms at 1 kHz,
10% THD)
30 watts + 30 watts
(6 ohms at 1 kHz, DIN)
35 watts + 35 watts
(6 ohms at 1 kHz,
10% THD)
400 watts
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms
CD player section
System
Laser
Laser output
Frequency response
Wavelength
Tape deck section
Recording system
Frequency response
Wow and flutter
Compact disc and digital
audio system
Semiconductor laser
( = 780 nm)
Emission duration:
continuous
Max. 44.6 W*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
20 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
4-track 2-channel stereo
60 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)