Naming A Track Or Md Using The Keyboard - Sony MDS-JE440 Operating Instructions Manual

Naming a track or MD
using the keyboard
If you use a keyboard, you can quickly enter or edit
names. While editing a name, you can move the cursor in
jumps or scroll the name.
Shortcut to the naming procedure
1
Press [Enter] while the deck is in one of the
operating modes listed below, depending on what
you want to name:
To name Press while the deck is
Playing, paused, recording, or stopped
A track
with the track number displayed
Stopped with total number of tracks
The MD
displayed
A flashing cursor appears in the display.
2
Enter a name.
In addition to letter keys, you can also use the keys
shown in the following table.
3
Press [Enter].
The whole name appears in the display.
Operations you may want to do while naming a
track or MD
To
Cancel the operation
Switch between uppercase
and lowercase letters
Move the cursor
Scroll the name
Erase the character at the
cursor position
Erase the character preceding
the cursor
Using the Edit Menu
1
Press [Esc] while the deck is in one of the
operating modes listed below, depending on what
you want to name:
To name
A track or the MD
The track being recorded
"Edit Menu" appears in the display.
2
Press [F10]/[F11] repeatedly until "Name ?"
appears, then press [F12].
While the deck is recording, a flashing cursor appears
in the display and you can enter a name for the track
being recorded. In this case, go to step 5.
Press on the keyboard
[Esc]
[Caps Lock]
[T] or [t]
[Page Up] or [Page Down]
[Delete]
[Back Space]
Press while the deck is
Stopped, playing, or paused
Recording the track
3
Press [F10]/[F11] repeatedly until "Nm In ?"
appears, then press [F12].
4
Press [F10]/[F11] repeatedly until the track number
(when naming a track) or "Disc" (when naming the
MD) flashes, then press [F12].
A flashing cursor appears.
5
Enter a name.
6
Press [F12].
The whole name appears in the display.

Naming a track or MD using the keyboard

47