Playing Mds; Using The Display - Sony MDS-JE320 Operating Instructions / Mode d’emploi Operating Instructions Manual

Playing MDs

Playing MDs

Using the Display

You can use the display to check disc and track
information such as the total track number, total
playing time of the tracks, remaining recordable time
of the disc and disc name.
Checking the total track number, total disc
playing time, remaining recordable time of
the disc and the title of the disc
Each time you press DISPLAY/CHAR while the deck
is stopped, you can change the display as follows:
Total track number and total playing
time of all recorded tracks
Remaining recordable time of the
disc (Recorded MDs only)
The remaining recordable time of the disc is
not shown for premastered MDs.
Disc name
Press
EN
14
DISPLAY/CHAR
≠ ±
0 )
§
·
P p r
√
Press
√
Press
When you insert an MD, the disc name, total number
of tracks, total disc playing time, and the music
calender appear in the display as follows:
Disc name
√
Total disc playing time
Total number of tracks
The disc name appears, followed by the total number
of tracks (Tr) and total disc playing time.
A music calendar showing all the track numbers
appears within a grid if the MD is a premastered disc,
or without a grid if the MD is a recordable disc.
If the total track number exceeds 25, z appears to the
right of number 25 in the music calendar.
To label a recordable disc and its tracks, see "Labeling
Recordings" on page 22.
Music calendar