Installation
1
Mounting
1 Installation
1.1 Mounting
4 | 22
Siemens
Building Technologies
NOTICE
Tip
Mount the sensor in a location that is easy to open the cover and access the
terminals, DIP switches and view the LEDs.
Proceed as follows to mount the sensor to a surface:
●
Screw the sensor at the 2 brackets (on the device sides) to the mounting
surface.
●
Keep the following guidelines
min. 75
134
All measurements in millimeters
5.5
q
A6V11478123_en_a
2019-02-01