5: Connecting The Antennas; 6: Preparing The Receiver And The Remote - Sony HT-SS360 Operating Instructions Manual

5: Connecting the
antennas
Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).
FM wire antenna (supplied)
AM loop antenna (supplied)
L L
DIGITAL
R R
AUDIO IN AUDIO IN AUDIO IN COAX IN OPT IN
VIDEO 2 SAT
VIDEO 1 TV SA-CD/CD
mA MAX
HDMI
BD IN DVD IN
RT
* The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
TV ANTENNA
AM
OPT IN
SAT IN OUT
6: Preparing the receiver
and the remote
Connecting the AC power cord
(mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
ACTIVE STANDBY
1
Press ?/1 to turn on the
receiver.
2
Hold down ?/1 for 5 seconds.
"CLEARED" appears.
All the settings you have changed or
adjusted are reset to the initial settings.
SPEAKERS
FRONT R FRONT L SUR R SUR L CENTER
INPUT SELECTOR
MASTER VOLUME
21 US