Exterior Lamps Off; Reminder; Headlamp High/Low-Beam; Changer - GMC Savana 2020 Owner's Manual

Table of Contents

Advertisement

: Turns on the headlamps,
parking lamps, taillamps, instrument
panel lights, and license plate
lamps.
If the headlamps are turned on
while the vehicle is on, the
headlamps turn off automatically
10 minutes after the ignition is
turned off. If the headlamps are
turned on while the vehicle is off,
the headlamps will continue to stay
on. To prevent the battery from
being drained, turn the control to the
position.
A warning chime sounds if the driver
door is opened while the ignition
switch is off and the headlamps
are on.
To change the headlamps from low
beam to high beam, pull the turn
signal lever all the way toward you.
Then release it.

Exterior Lamps Off

Reminder

If a door is open, a reminder chime
sounds when the headlamps or
parking lamps are manually turned
on and the key is out of the ignition.
To turn off the chime, turn the
headlamp switch to
or AUTO and
then back on, or close and re-open
the door. In the auto mode, the
headlamps turn off once the ignition
is off or may remain on until the
headlamp delay ends, if enabled in
the Driver Information Center (DIC).
See Exit Lighting under Vehicle
Personalization 0 105.
Headlamp High/
Low-Beam Changer
: Pull the turn signal lever all
the way toward you to change the
headlamps from low to high beam.
Then release it.
Pull the turn signal lever all the way
toward you again and release it to
change the headlamps back to
low beam.
Lighting
This instrument cluster light comes
on when the high-beam headlamps
are on.

Flash-to-Pass

This feature is used to signal to the
vehicle ahead that you want
to pass.
If the headlamps are off or in the
low beam position, pull the turn
signal lever toward you to
momentarily switch to high beams.
Release the lever to turn the
high-beam headlamps off.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of the vehicle during
the day.
111

Advertisement

Table of Contents
loading

Table of Contents