Adjusting The Recording Level - Sony DHC-MD595 Primary Operating Instructions Manual

Adjusting the recording
level
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when making
an analog recording, but also when making a
digital recording from a CD, etc.
4,6
4,5
2
1
Prepare the desired sound source to
record and start play.
2
Press MD z REC to stand by for
recording.
36
3
4
5
3,7
4,5
6
8
7
8
9
Tips
• You can also adjust the recording level during
recording.
• Once adjusted, the recording level is maintained
until you adjust it again.
Press MENU/NO repeatedly until
"Setup Menu" appears.
Press – or + repeatedly until
"LevelAdjust?" appears, then press
ENTER/YES.
Press – or + to adjust the recording
level.
While monitoring the sound, adjust to the
optimum level while making sure that
"OVER" does not appear in the display at the
loudest portion.
Adjust the level so that
"OVER" does not appear
Press ENTER/YES.
Press MENU/NO.
Press x to cancel recording pause.
When a CD or other sound source is
playing, stop playback.
To continue and record, follow the
procedures described on the various
recording pages.