Sony DAV-X1V Operating Instructions Manual page 74

2
Place the calibration mic so that the
"FRONT" side of it is pointed toward
the front speakers.
Top view
Front speaker (L)
The front of each speaker should face
parallel to the calibration mic, and there
should be no obstruction between them.
3
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
4
Press
in stop mode.
The Control Menu appears.
5
Press X/x to select
CALIBRATION], then press
1 ( 4 4 )
3 ( 2 8 )
T 0 : 0 3 : 0 4
AUTO CALIBRATION
START
74
US
Front speaker (R)
Parallel
Calibration mic
FRONT
DISPLAY when the system is
[AUTO
DVD VIDEO
6
Press
7
Press X/x to select [YES], then press
Be quiet during the measurement.
Note
• Avoid being in the measurement area and
making noise during the measurement (about 1
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• Reflections from walls or the floor may affect
measurements.
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– subwoofer is not connected.
.
– the left and right speakers are reversed.
– the left and right of the calibration mic are
.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
to start the auto calibration.
Measuring. Please wait a moment.
reversed.