Adjusting The Delay Between The Picture And Sound; (A/V Sync); Selecting A Playback Layer For A Super Audio Cd - Sony DAV-X1V Operating Instructions Manual

Adjusting the Delay
Between the Picture and
Sound

(A/V SYNC)

* European models only.
When the sound does not match the pictures on
the screen, you can adjust the delay between the
picture and sound.
1
Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
2
Press X/x to select
then press .
The options for [A/V SYNC] appear.
1 ( 1 2 )
1 ( 2 8 )
T 0 : 0 0 : 0 2
OFF
OFF
ON
3
Press X/x to select the setting you
want and press
The default setting is underlined.
• [OFF]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
The selected setting takes effect.
Note
• Depending on the input stream, this function may not
be effective.
* *
[A/V SYNC],
DVD VIDEO
.
Selecting a Playback
Layer for a Super Audio CD
Some Super Audio CDs consist of a Super
Audio CD layer and a CD layer. You can select
the playback layer you want to listen to.
Press SA-CD/CD when the system is in
stop mode.
Each time you press the button, a Super Audio
CD layer or a CD layer is alternately selected.
When playing a Super Audio CD layer,
"SA-CD" lights up in the front panel display.
Note
• For details about Super Audio CD discs, see page 91.
• Each play mode function works only within the
selected layer.
• You cannot change a playback layer during playback.
• Super Audio CD audio signals are not output from the
HDMI OUT (high-definition multimedia interface
out) jack.
53
US