Using The Md Display - Sony CMT-PX333 Operating Instructions Manual

5
To programme additional tracks, repeat
steps 3 and 4.
6
Press MD NX (or MD N on the
remote).
To Do this
Press x for the MD, then press
Cancel
Programme Play PLAY MODE repeatedly until
"PROGRAM" and "SHUFFLE"
disappear.
Check the total Press TIME on the remote in stop
number of mode. The total number of
programmed programmed steps appears,
tracks followed by the last programmed
track number and the total playing
time of the programme.
Check the Press . or > for the MD
programme repeatedly during Programme
order Play.
Clear a track Press CLEAR on the remote in
from the end stop mode.
Add a track to Perform steps 3 and 4.
the programme
in stop mode
Select the Use number buttons instead of
desired track performing steps 3 and 4. To use
using the number buttons, see page 14.
number buttons
on the remote
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD NX (or MD N on
the remote).
• "---.--" appears when the total MD programme time
exceeds 1,000 minutes.

Using the MD display

Checking the remaining time
Press TIME on the remote repeatedly
during play.
The display changes cyclically as follows:
Elapsed playing time and the track number on
the current track t Remaining time and the
track number on the current track t
Remaining time on the MD
Checking the total playing
time
Press TIME on the remote repeatedly in
stop mode.
The display changes cyclically as follows:
Total number of tracks and total playing time
t Remaining recordable time (Only for a
recordable MD)
Checking a track title or a
disc title
Press DISPLAY on the remote repeatedly
during play or in stop mode.
The display changes cyclically as follows:
Preset Equalizer name t Clock t Volume
t Track title or disc title*
* The track title appears during play, and the disc title
appears while stopped. If an MD that has no title is
loaded, nothing appears.
Tip
You can check a track title at any time during play. If
you press SCROLL on the remote, a track title
appears scrolling in the display.
Press SCROLL on the remote at any point during the
scroll display to stop the scrolling. Press SCROLL on
the remote again to restart the scrolling.
15