Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A MD jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
Listening to audio from a
connected component
1
Connect audio cords.
See the illustration above.
2
Press FUNCTION repeatedly until "MD"
appears.
Start playing the connected component.
Optional analog component
Recording audio from a
connected component
1
Connect audio cords.
2
Start recording manually.
See "Recording on a tape manually" on
page 16.
From the audio output
jacks of an optional
analog component
GB
21