Switching On And Off Automatically; Sequence Of A Programme That Switches On And Off Automatically - Miele HR1956 Operating Instructions Manual

Switching on and off automatically

We recommend using automatic
switching on and off when roasting.
However, do not delay the start for too
long when baking as the cake mixture
or dough will dry out, and the raising
agents will lose their effectiveness.
To switch a cooking programme on and
off automatically, you have a choice of
how to enter the time parameters:
– and
Duration Finish at
– Duration and Start at
– and
Finish at Start at
Example: It is 11:30. The food takes
30 minutes to cook and should be
ready at 12:30.
 Select .
Change
 Select
Open further settings
 Set a duration of 00:30 h in the
field.
Duration
 Set a time of 12:30 in the
field.
 Confirm with OK.
The time will be calculated
Start at
automatically.
Start at 12:00
in the display.
The oven will switch on automatically
when this time is reached.
Using the oven - further functions
Sequence of a programme that
switches on and off automatically
Up until the start time the function, the
selected temperature,
start time will appear in the display.
After the programme has started, you
can follow the heating-up phase in the
display until the required temperature
has been reached.
Once this temperature is reached, a
buzzer will sound if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
After the heating-up phase, the time
remaining will appear in the display.
You can follow the time counting down
in the display. The last minute counts
down in seconds.
At the end of the programme a buzzer
.
will sound if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
The oven heating and lighting will
Finish at
switch off.
the display.
You have the option of saving the
programme as a User programme (see
will appear
"User programmes") or increasing the
duration of the programme via
During the cooling down phase the
cooling fan will continue to run for a
while.
Start at
will appear in
Process finished
and the
Change .
71