Download Print this page

Vax Advance VX96 User Manual page 3

Barrel vacuum

Advertisement

Children should not play with the vacuum cleaner. Cleaning and user
maintenance should not be made by children without supervision
• Only Vax recommend tools and accessories should be used with this
vacuum cleaner
• Vax recommends the use of a Residual Current Device rating of 30 mA or less.
• If the supply cord is damaged, it must be replaced by the manufacturer,
or similarly qualified person in order to avoid a hazard, or invalidating
the warranty.
• IMPORTANT: The motor is equipped with a thermal cut-out. If for any
reason the unit should overheat, the thermostat will automatically turn the
unit off. Should this occur, unplug the vacuum cleaner from the electrical
outlet and turn off the switch. Remove dirt container and empty. Clean
filters. Allow the unit to cool for approximately one (1) hour. To re-start,
plug into an electrical outlet and switch back on.
• Don't attempt to remove blockages with sharp objects as this may cause
damage to the vacuum cleaner.
• Don't vacuum hard or sharp objects such as glass, nails, screws or coins etc.
• Don't not vacuum plaster dust, concrete dust or any other building
or vitreous material.
• Don't vacuum flour, baking soda or any other powder-based carpet refresher
or deodoriser.
• Don't use this vacuum cleaner if it has been dropped, damaged or left outdoors.
• Don't vacuum up any flammable or combustible materials (lighter fluid, petrol,
kerosene etc.) or use the vacuum cleaner in an area with explosive vapours
or liquid.
• Use only SAA approved 10amp extension cords. Care should be taken to
arrange the extension cord as it can be a trip hazard.
• Always carry the vacuum cleaner by the handle.
• Store your vacuum cleaner in a cool, dry area.
• Always keep the power cord away from the brushes whilst using your
vacuum cleaner.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.

Hide quick links:

Advertisement

loading