Messages - Sony CMT-HX70BTR Operating Instructions Manual

Messages

CD/MP3 player, Tuner
Complete!: The preset operation ended
normally.
LOCKED: The disc tray does not open.
Contact your nearest Sony dealer.
No Disc: There is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
Over: You have reached the end of the
disc while pressing 
playback or pause.
Push STOP!: You pressed PLAY MODE

during playback.
Reading: The system is reading
information of the disc. Some buttons
are not available.
Step Full!: You tried to program more
than 26 tracks or files (steps).
TIME NG!: The Play Timer start and end
times are set to the same time.
Bluetooth device
Connect: Bluetooth communication was
established.
Connecting: The system is attempting
to connect with recently connected
Bluetooth devices.
Disconnect: Communication with a
Bluetooth device was cut off for some
reason, or Bluetooth communication
was ended.
No Device: A pairable Bluetooth device
was not found, or connection was not
possible.
Not in Use: The system is not connected
with a Bluetooth device using A2DP, or
the Bluetooth device does not support
a command for selecting a folder
operations ( +/
PIN?: The system is asking for the
passkey. For details, see "Using the
Bluetooth function" (page 15).

during

).
Please Wait: The system is readying for
usage of a Bluetooth device.
USB device
Complete!: The audio file or folder on
the USB device has been erased.
Device Full!: The USB device is full.
Erase Error!: Erase of audio files or
folders on the USB device failed.
Error: The USB device could not be
recognized or an unknown device is
connected (page 35).
Fatal Error!: The USB device has been
disconnected while recording to or
erasing audio files or folders on the
USB device.
Folder Full!: The number of folders
on the USB device has reached the
maximum.
No Device: No USB device is connected
or the connected USB device has been
stopped.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not in Use: You have made an invalid
operation.
Not Supported: An unsupported USB
device is connected.
Please Wait: The system is readying for
usage of an USB device.
Protected!: You tried to record or erase
a write-protected USB device.
Reading: The system is recognizing the
USB device.
Rec Error!: Recording did not start,
stopped partway, or otherwise could
not be performed (page 34).
Removed: The USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
Storage Drive: USB device is connected.
Track Full!: The number of files on the
USB device has reached the maximum.

GB