Sony CMT-HX70BTR Operating Instructions Manual page 11

 Speakers
Connect the speaker cords to the
SPEAKER jacks.
For CMT-HX70BTR, connect the other
end of the speaker cords to the terminals
on the speakers as shown below.
Insert only the stripped portion and
then turn the nut clockwise.
Black
()
 Power
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
 Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
 DMPORT (DIGITAL MEDIA PORT)
Connect the DIGITAL MEDIA PORT
adapter. You need to connect the
DIGITAL MEDIA PORT adapter to an
optional audio device (portable audio
player, etc.).
Notes
 Available DIGITAL MEDIA PORT adapters
vary in each area.
 Do not connect an adaptor other than the
DIGITAL MEDIA PORT adapter.
 Do not connect or disconnect the DIGITAL
MEDIA PORT adapter to/from the
DMPORT while the system is on.
 When using a DIGITAL MEDIA PORT
adapter that has video output function,
connect the adaptor directly to the TV.
When carrying this system
1
Remove a disc to protect the CD
Red
mechanism.
()
2
Press FUNCTION +/ (or FUNCTION
Red
on the unit)
()
the CD function.
3
Hold down SEARCH
and press 
"STANDBY" appears.
4
After "LOCK" appears, unplug the
power cord.
Speaker pads
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.

repeatedly to select

on the unit,

on the unit until

Continued
11
GB