Using The Pouring Shield - KitchenAid KSM7581 Instructions Manual

Attaching the Pouring Shield
1. Make sure the speed control lever
is set to the “0” (OFF) position.
2. Unplug the Stand Mixer.
3. Attach desired accessory and raise
the mixing bowl.
4. Slide pouring shield collar around
beater shaft, centering collar over
rim of bowl.

Using the Pouring Shield

Pour ingredients into the mixing bowl
through the chute portion of shield.
IMPORTANT: Make sure the guides
on the bottom of the chute rest
on the rim of the bowl to keep
ingredients from falling outside
the bowl as they are added.
*Included with some models.
8
Using the Pouring Shield*
Pouring Chute
Removing the Pouring Shield
1. Make sure the speed control lever
is set to the “0” (OFF) position.
2. Unplug the Stand Mixer.
3. Slide the pouring shield off
the bowl.
4.Lower the bowl support by
turning the bowl-lift lever down.
5. Remove accessory and the
mixing bowl.
Cleaning the Pouring Shield
Wash with soap and warm water.