Oki OkiFax 1050 Service Manual page 259

39A1
39B0
39B1
39C0
39C1
41A0
41A6
41A9
41AA
41C8
41CE
49CC
49CD
60A0
6803
9080
9081
9082
9083
9084
9087
9088
9089
908E
9090
90B1
90C1
90C6
90C7
90D4
90D5
90F0
90F1
The number of random-error lines have exceeded the specified limit.
Memory Overflow has occurred while receiving in memory.
Memory Overflow occurred during Confidential Reception.
DECODER hardware error. (cannot reproduce picture)
DECODER hardware error. (cannot detect end of picture)
There was no response each time in response to the three post commands.
Received signal other than the desired signal in responce to the post command.
Fall back in Phase C is not possible.
Received PIN for the post command.
T5 time out.
Received negative signal in response to the post command.
Received signal other than the desired signal in response to RNR.
Command not received in response to RNR.
Broadcast completed.
DCN received in response to NSF/DIS without sending a single picture.
Pressed STOP key.
T1 time out.
T2 time out.
T3 time out.
No recording paper.
Document jam.
60-minute or 70-minute time out.
Document length has exceeded its maximum limit.
Recording paper jam.
Received DCN.
Picture memory hash error.
Document removed prior to transmission.
Normal or error-free lines not received for 13 seconds.
Error frame protocol received.
Hardware error in transmission system. (response of modem not detected)
ENCODER error. (Picture storage fault)
Option (2'nd tray) error.
Fan motor error.