Oki OkiFax 1050 Service Manual page 23

3) Ring response time
31 Image memory
OKIFAX 1050
OKIFAX 2350
OKIFAX 2450
Memory
condition
With Standard
(without
option)
option 0.5M-byte
1M-byte
board 2M-byte
message
32 Telephone handset
is on.
(option)
34 Overheat protection
predetermined
of the
prevents
failures
One-ringing signal or 5 to 30 seconds.
(Selectable in 5 sec. steps. F + OT9 + • + 15)
Basic model
256K-byte
256K-byte
OKIFAX 2450 512K-byte
OKIFAX OKIFAX
1050 2350
[pages] [pages]
17 17
56 56
100 100
180
Note: No. of sheets is counted provided that ITU-T No.1
sample documents are used.
Note : Back-up time on electrical interruption:
Min. one hour (OKIFAX 2450 only)
Note: OKIFAX 1050/2350 does not back up the
received in memory for the power failure.
General telephone function is available while the power
The heat of the fuser unit is controlled within
temperature range by the thermistor. If the temperature
heater exceeds this range, the LCD displays
ALARM 4".
Furthermore, the built-in thermostat in the fuser unit
the fuser from being overheated even in the event of the
in the above temperature control circuit.
Optional memory
512K-byte/1M-byte
512K-byte/1M-byte/2M-byte
512K-byte/1M-byte/2M-byte
OKIFAX OKIFAX
2450 2450
A4 Setting LEGAL
[pages] Setting
[pages]
35 27
79 70
120 110
200 195
"PRINTER