Siemens SIMATIC RF1000 Series Operating Instructions Manual page 9

Supported transponders and protocols
The following table provides an overview of the transponders and protocols supported by the
readers.
Table 2- 2
Transponder families
MDS D1xx, D3xx, E6xx
MDS D2xx
MDS D4xx, D5xx
Protocols
FeliCa
ISO 14443 A/B general
ISO 15693 general
LEGIC prime
LEGIC advant (ISO 14443 A)
LEGIC advant (ISO 15693)
MIFARE Classic, EV1 (1k, 4k,
Mini)
MIFARE DESFire, EV1/EV2
(2k, 4k, 8k)
MIFARE Plus, EV1 (S, X, L1,
L2, L3)
MIFARE Ultralight (C)
HID iClass, Inside PicoPass
NXP NTAG21x
✓: Reading the serial number as well as reading and writing the user memory area
Only for read-only access
1)
Please note that serial numbers (UIDs) of transponders that begin with the byte "0x08" are
always newly generated by the transponder. This makes an assignment of serial numbers
and transponders impossible. Note that when the serial number is read for transponders with
combo chip (e.g. LEGIC CTC4096), only the LEGIC Prime serial number is displayed and
not the serial number of the ISO chip 14443/15693.
The reader can be addressed and controlled by functions, for example to change the status
of the reader or to communicate with a transponder. With the aid of the functions, you can for
example control the three-color reader LED. Which functions exist and how you use them is
described in this manual.
SIMATIC RF1000
Operating Instructions, 02/2019, C79000-G8976-C432-04
Supported transponders and protocols
2.2 Connection options and supported transponders
SIMATIC RF1060R
✓
✓
1)
✓
Serial number
Serial number
✓
--
Serial number
Serial number
✓
✓
✓
Serial number
Serial number
Serial number
Description
SIMATIC RF1070R
✓
✓
--
Serial number
Serial number
✓
✓
✓
✓
✓
✓
Serial number
Serial number
Serial number
Serial number
9