Frequency response
Analog
Input
Analog
Digital (Coaxial)
Digital (Optical)
Output (analog)
AUDIO OUT
SUB WOOFER
Equalizer
Gain levels
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
Intermediate frequency
Useable sensitivity
S/N
Mono/Stereo:
Harmonic distortion at 1 kHz
Mono/Stereo:
Separation
Frequency response 30 Hz – 15 kHz,
98
US
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 500 mV/
50 kohms
3)
S/N
: 96 dB
4)
(A, 500 mV
)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV/10 kohms
Voltage: 2 V/1 kohm
±10 dB, 1 dB step
87.5 – 108.0 MHz
10.7 MHz
11.2 dBf, 1 µV/75 ohms
76 dB/70 dB
0.3%/0.5%
45 dB at 1 kHz
+0.5/–2 dB
AM tuner section
Tuning range
Area
Tuning scale
code
10 kHz step
U, CA
530 – 1,710 kHz
Intermediate frequency
Usable sensitivity
5)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down CATEGORY
MODE, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Video:
S-video:
COMPONENT VIDEO:
9 kHz step
5)
531 – 1,710 kHz
450 kHz
50 dB µ/m (at 1,000 kHz or
999 kHz)
1 Vp-p/75 ohms
Y: 1 Vp-p/75 ohms
C: 0,286 Vp-p, 75 ohms
Y: 1 Vp-p/75 ohms
P
/C
/B-Y: 0.7 Vp-p/
B
B
75 ohms
P
/C
/R-Y: 0.7 Vp-p/
R
R
75 ohms
80 MHz HD Pass Through
5)