Sony STR-DG800 Operating Instructions Manual page 11

Name Function
A AV ?/1
Press to turn on or off the
Sony audio/video components
that the remote is
programmed to operate.
To turn the TV on or off, press
TV(wk) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?/1
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Name Function
C Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components by changing the
code. For details see
"Programming the remote"
(page 86).
Button
VIDEO 1
VIDEO 2
VIDEO 3
DVD
TV/SAT
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
TUNER
PHONO
D 2ND ZONE
Press 2ND ZONE to light up
the button to select the
command mode of the remote.
E SOURCE
Press to select the current
input for the main receiver.
F MOVIE,
Press to select sound fields
MUSIC (MOVIE, MUSIC).
G AUTO CAL
Press to activate the Auto
Calibration function.
H D.TUNING
Press to enter direct tuning
mode.
Assigned Sony
component
VCR (VTR mode 3)
VCR (VTR mode 2)
VCR (VTR mode 1)
DVD player
TV tuner
player
Built-in tuner
Not assigned.
continued
11
US