8: Adjusting The Speaker Levels And Balance (Test Tone) - Sony STR-DG810 Operating Instructions Manual

8: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
TV RM SET UP
VIDEO 1 VIDEO 2 VIDEO 3
SAT TV
AUX DMPORT
2CH A.F.D.
CATEGORY
SLEEP MODE
1
4
7
– /– –
0/10
CLEAR
>10
GUIDE
B
2
RETURN/
MENU
EXIT
– CATEGORY +
REPLAY ADVANCE
. <
TUNING –
H
m
DISC SKIP
TV VOL
MASTER VOL
MUTING
DVD
34
US
?/1
AV ?/1
SYSTEM STANDBY
DVD
SA-CD/CD TUNER
1
RECEIVER
MOVIE MUSIC
D. TUNING AUTO CAL
2 3
5 6
8 9
ENTER
MEMORY
DISPLAY
V
3-6
B
v
OPTIONS
TOOLS
< >
TUNING +
M
X x
TV CH
PRESET
MASTER
VOL +/–
1
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2
Press MENU.
"1-LEVEL" appears on the display.
3
Press or b to enter the
menu.
4
Press V/v repeatedly to select
"T. TONE".
5
or b to enter the
Press
parameter.
6
Press V/v repeatedly to select
"T. TONE Y".
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround back t
Surround left t Sub woofer
7
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the level
(LEVEL menu)" (page 43).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
8
Repeat steps 1 to 6 to select
"T. TONE N".
You can also press any input buttons.
The test tone turns off.