Naming Inputs - Sony STR-DG810 Operating Instructions Manual

Assignable inputs for digital
audio input
The initial setting is marked with an
underscore.
Digital audio Assignable
input inputs
[Display]
VIDEO 1 VIDEO 1
OPTICAL
VIDEO 2
[VD1 OPT]
VIDEO 3
DVD
TV
SA-CD/CD
DVD VIDEO 1
COAXIAL
VIDEO 2
[DVD COAX]
VIDEO 3
DVD
SAT
TV
SA-CD/CD
SAT OPTICAL VIDEO 2
[SAT OPT]
VIDEO 3
DVD
SAT
TV
SA-CD/CD
Notes
• You cannot reassign several digital audio inputs to
the same input.
• You cannot use the digital audio input for the
original input when it is reassigned to another
input.
• When you reassign the digital audio input, the
INPUT MODE setting may change automatically
(page 71).
• You cannot reassign the digital audio input to
TUNER, XM Radio and DMPORT.
76
US

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
Display
This is convenient for labeling the jacks with
the names of the connected components.
VD1– VD1 1
VD1– VD2
VD1– VD3
VD1– DVD
VD1– TV
2
VD1– CD
DVD– VD1
DVD– VD2
3
DVD– VD3
DVD– DVD
DVD– SAT
4
DVD– TV
DVD– CD
5
SAT–VD2
6
SAT– VD3
SAT– DVD
SAT– SAT
SAT– TV
SAT– CD
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
Press RECEIVER and then
press MENU.
"1-LEVEL" appears on the display.
Press V/v repeatedly to select
either "5-AUDIO" or "6-VIDEO".
or b to enter the
Press
menu.
Press V/v to select "NAME IN".
Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 62).