a Extraction, recirculation with
conversion kit DUU 150.
b The wall unit carcase needs to be 38
mm shorter than the wall unit door.
c Installation is also possible in a 600
mm wide unit. In this case the unit
door must open upwards to allow
access to the grease filters. This also
applies for adjacent units.
d The ducting can also be connected
at the back.
e After installation the wall unit can be
fitted with an interim panel. If this is
done make sure that the slots for the
grease filters and, for recirculation
mode, the charcoal filters remain
easily accessible.
f Alternatively the wall unit can be
fitted with side sections.
g If the hood is installed in a wall unit
with a base, openings must be
provided to enable adjustment of the
retaining force of the deflector plate.
For example:
– The wall unit has side sections, as
shown.
– The cooker hood is installed in a
600 mm wide unit with units at
either side.
The height of the wall unit and cut-out
dimensions must take account of any
accessories fitted, e.g. silencer, DSM
module.
Installation
33