Philips 190B9CS/00 Service Manual page 84

84 HUDSON 9
3.16.1.1 Position
Pressing the "Smart Image" button, the position is in the bottom center of the screen.
3.16.1.2 Smart Image Logo & Banner
As design to keep the Light Frame logo at header but change the name to "Smart Image" with bitmap format.
3.16.1.3 Icon of each profile
Each profile will use text instead of icon & text before.
3.16.1.4 User Operation Procedure
A. 5 different modes are switched to next in the sequence from 1 to 5 then back to 1 while pressing this button:
1) Office Work 2) Image Viewing 3) Entertainment 4) Economic Economy 5) Off. The default setting is 'Off".
B. The FOS optimization will be changed in real time by which profile to be scrolled, users don't need to
confirm to enable.
C. The Smart Image OSD will remain on screen for 5 seconds after user last action. Or user can also press
[MENU] to close the Smart Image OSD immediately.
D. Except using [MENU] button to scroll down profile. If Smart Image OSD already launched onscreen. User is
allowed to use up/down key to choose profile and press [MENU] to confirm selection and close the Smart
Image OSD.
E. If the model has multiple inputs including VGA and DVI, each input has their own set of profiles. When user
switch input, the profile to be applied will also change.
F. Each input can memorize their individual "Smart Image" profile status.
For example, Smart Image is on with "Office" profile at VGA input, when switch to DVI input, the Smart Image
will revert to previous profile of DVI.
In the input switching process the "Smart Image" OSD will also show up to present which profile is selected if
"Smart Image" is enabled at that input.
The Smart Image status will also be stored after the monitor is resumed from AC on/off or power switch on/off.
3.16.1.5Linkage between Smart Image OSD and main OSD
A. Settings within main OSD have linkage with Smart Image OSD.
i. Brightness
ii. Contrast
iii. Color Temperature
B. Because each preset profiles will define default setting of these 3 parameters. Users can understand what is
the value of that in preset profile by open the main OSD.
C. When any Smart Image profile had been enabled. The parameters in main OSD are still available for user to
adjust. But these adjustments are temporary only. If users switch to another profile and then go back.
The setting in main OSD will show preset values of that Smart Image profile enabled.
3.16.1.6 Profile Definitions (system integrators to input at design stages)
A. Office Work
i. Purpose: Design for general office application, like word processing, Spreadsheet and email. The screen is
dominated by text.
ii. Enhancement point:
1. A little sharpness for increasing the details of e.g. an excel grid.
No other type of enhancement as it won't bring value.
2. Color temperature remains in 6500°K.
3. Brightness level should be 70%.
4. Smart Response set to "Off".
5. Smart Contrast set to "Off".