Table of Contents
Advertisement
Changing the display
Changing the information in
the display
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows.
Index name of the input
Sound field currently applied
When the tuner is selected
Program Service name
t Frequency t Program Type indication
t Radio Text indication
indication (in 24-hour system)
currently applied.
* Index name appears only when you have assigned
one to the input or preset station (page 35). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
** During RDS reception only. (Models of area code
CEL, CEK only. See page 25).
Adjusting the brightness of
the display
Press DIMMER repeatedly.
The brightness of the display will change in 3
steps.
GB
26
*
t Selected input t
**
or preset station name
**
**
t Current Time
**
t Sound field
*
Hide quick links:
Advertisement
Table of Contents
