Sony STR-DE497 Operating Instructions Manual page 46

Sony fm stereo fm/am receiver operating instructions str-de497
Hide thumbs Also See for STR-DE497:
Table of Contents

Advertisement

Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
Reference Power Output
(8 ohms 1 kHz, THD 10%)
1) Measured under the following conditions:
Area code
SP, CEL, CEK, KR
E2/E3, AU
TW
2) Depending on the sound field settings and the
source, there may be no sound output.
3) Measured under the following conditions:
Area code
KR
Frequency response
MULTI CH IN,
SA-CD/CD, MD/TAPE,
DVD, VIDEO 1, 2
Inputs (Analog)
MULTI CH IN,
SA-CD/CD, MD/TAPE,
DVD, VIDEO 1, 2
4) INPUT SHORT (with sound field and tone
bypassed).
5) Weighted network, input level.
GB
46
1)
80 W + 80 W
1)
2)
FRONT
: 100 W/ch
2)
CENTER
: 100 W
2)
SURR
: 100 W/ch
Power requirements
230 V AC, 50 Hz
240 V AC, 50 Hz
110 V AC, 60 Hz
Power requirements
220 V AC, 50 Hz
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Sensitivity: 500 mV
Impedance: 50 kiloohms
4)
S/N
: 96 dB
5)
(A, 500 mV
)
Inputs (Digital)
DVD (Coaxial)
VIDEO 2, SA-CD/CD
(Optical)
Outputs (Analog)
MD/TAPE (OUT),
VIDEO 1 (AUDIO OUT)
SUB WOOFER
TONE
Gain levels
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
Sensitivity
Mono:
Stereo:
Useable sensitivity
S/N
Mono:
Stereo:
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response
Selectivity
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 kiloohms
Voltage: 2 V
Impedance: 1 kiloohms
±6 dB, 1 dB step
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
76 dB
70 dB
0.3%
0.5%
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
60 dB at 400 kHz

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents